| 92.20.1006.990.11.1503 Standard 5 Slewing Ring Bearings | Grease Type:Unirex N2; d:1.2500 in; Bearing Family:D-Lock Ball Bearing; Flinger Type:Rubberized; Anti-Rotation Pin:Yes; Ball Grade:Class 10; Self Aligning:Self Centering; Bearing Duty:Normal Duty; Ship Weight:2.5 LB; Bearing Insert Material:Steel; Max Bearing Speed:5500 rpm; Bearing Inner Ring Material:Steel; Bearing Locking Device:Concentric Clamp Col; Manufacturing Plant Location:Rogersville, TN; |
| 282.30.1075.013 Type 110/1200.2 Standard 5 Slewing Ring Bearings | d:95 mm; Weight:1,78 Kg; Outer Diameter (mm):130; Bore Diameter (mm):95; C:46 mm; Bearing number:NA5919; Fw:110 mm; B:46 mm; Size (mm):95x130x46; D:130 mm; Basic static load rating (C0):331 kN; r min.:1,1 mm; Width (mm):46; Basic dynamic load rating (C):141 kN; |
| 62.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):32; C:20 mm; Fw:32 mm; Basic static load rating (C0):39.4 kN; r min.:0.3 mm; Bearing number:NQ32/20; Outer Diameter (mm):42; D:42 mm; Size (mm):32x42x20; Weight:0.070 Kg; Basic dynamic load rating (C):24.3 kN; Width (mm):20; |
| 62.20.0710.001.21.1503 Standard 5 Slewing Ring Bearings | Flinger Material:Stainless Steel; Anti-Rotation Pin:Yes; End Cap Groove:Yes; Base to Center Height:Standard; Bearing Inner Ring Material:Steel; Bearing Outer Ring Material:Steel; d:30.0000 in; Housing Material:Polymer; Flinger Type:INTERNAL RUBBER LIP; Ring Size:Standard; Retainer Material:Polymer; Grease Type:Mobilgrease FM222; Ball Material:440 STAINLESS STEEL; Bearing Insert Material:Nickel-Coated Steel; |
| 230.20.0400.503 Type 21/520. Standard 5 Slewing Ring Bearings | Weight:0,27 Kg; B:25 mm; Basic static load rating (C0):82 kN; r min.:0,6 mm; Fw:55 mm; Fatigue load limit (Pu):14; C:25 mm; Bore Diameter (mm):50; Outer Diameter (mm):68; Reference speed:6 000 r/min; Basic dynamic load rating (C):45,5 kN; d:50 mm; Bearing number:NKI50/25-XL; Size (mm):50x68x25; D:68 mm; S:1,5 mm; Width (mm):25; |
| 61.20.0560.100.11.1503 Standard 5 Slewing Ring Bearings | D:100 mm; Outer Diameter (mm):100; Size (mm):55x100x33.3; B:33,3 mm; Bearing number:3211-2RS; Width (mm):33,3; C:33,3 mm; d:55 mm; Bore Diameter (mm):55; |
| 230.21.0875.013 Type 21/950. Standard 5 Slewing Ring Bearings | Bearing Outside Diameter, Nominal(Do):39.000; Shaft Dia., Nominal (d):35.0000; ID Chamfer Angle (B deg.):35; Bearing Length, Nominal (B):25.000; Material:Wrapped bronze with; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; ID Chamfer Length (Ci):0.500; OD Chamfer Length (Co):1.200; Outer Diameter (mm):39; Bearing Bore after Mounting (di) - 35 +0.062 / -0:35 +0.062 / 0; Bore Diameter (mm):35; |
| 250.15.0375.013 Type 13/4 Standard 5 Slewing Ring Bearings | Basic dynamic load rating (C):5,9 kN; Bore Diameter (mm):12; Bearing number:KBK 12x15x15; Fw:12 mm; Basic static load rating (C0):7,8 kN; Outer Diameter (mm):15; Bc:15 mm; Weight:0,0056 Kg; Ew:15 mm; |
| 230.20.0900.503 Type 21/1050. Standard 5 Slewing Ring Bearings | (Grease) Lubrication Speed:700 r/min; Basic static load rating (C0):2560 kN; Weight:98 Kg; Bearing number:NP19/530; Ew:665 mm; Outer Diameter (mm):710; D:710 mm; d:530 mm; C:82 mm; Size (mm):530x710x82; Bore Diameter (mm):530; Width (mm):82; Basic dynamic load rating (C):1320 kN; B:82 mm; |
| 230.21.0975.013 Type 21/1050. Standard 5 Slewing Ring Bearings | Width:1.339 Inch | 34 Mill; Product Group:B04144; Retainer:No; Outside Diameter:2.165 Inch | 55 Mill; D:55 mm; Separable:No; Bore:1.181 Inch | 30 Mill; Snap Ring:Yes; Bearing number:SL045006-PP; Ca1 - 25 mm / Mounting dimension for snap ring WRE / Tolerance: -0,2:25 mm / Mounting dim; Ca2 - 24 mm / Mounting dimension for retaining ring to DIN 471 / Tolerance: -0,2:24 mm / Mounting dim; C0r:67000 N / Static loa; |
| 232.21.0875.013 Type 21/950.2 Standard 5 Slewing Ring Bearings | ns:17,7 mm; B:114 mm; D:340 mm; da max:191 mm; D1:286,7 mm; rmin:4 mm; ra max:3 mm; Outer Diameter (mm):340; m1:9,32 kg; nG:2250 1/min / Limitin; l:147 mm; ds:9,5 mm; Ba min:8 mm; Size (mm):140x340x114; Y0:1,89; e:0,35; db min:174 mm; c:28 mm; Width (mm):114; Cr:1680000 N / Dynamic; |
| 60.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | Fw:12 mm; Bearing number:HMK1215; maximum rpm:20000 rpm; Characteristic cage frequency, FTF:0.41 Hz; Mass:0.01 kg; drawn cup type:Open Ends; Inner ring reference:IR9X12X16; lubrication hole type:No Hole; overall width:15 mm; Cr:9.4 kN; operating temperature range:-40 to 250 ºF,; cage material:Steel; precision rating:ISO Class 0; Max operating temperature, Tmax:120 °C; Nlim (oil):20,000 rpm; Min operating temperature, Tmin:-20 °C; |
| S24-178E1 Rotek Slewing Ring Bearings | Outer Diameter (mm):63; D:63 mm; Bearing number:HK 5520; Bore Diameter (mm):55; Basic dynamic load rating (C):29,95 kN; Width (mm):20; Weight:0,078 Kg; C:20 mm; Size (mm):55x63x20; Basic static load rating (C0):63,65 kN; Fw:55 mm; |
| 3R8-98N1 Rotek Slewing Ring Bearings | (Grease) Lubrication Speed:2800 r/min; Basic static load rating (C0):53 kN; Basic dynamic load rating (C):119 kN; Weight:6,75 Kg; Bearing number:1224K+H3024; C:42 mm; Outer Diameter (mm):215; B1:72 mm; d:120 mm; d1:110 mm; Bore Diameter (mm):120; D:215 mm; B2:22 mm; Size (mm):120x215x42; B:42 mm; Width (mm):42; |
| 61.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | Weight:1,9 Kg; Basic static load rating (C0):17,8 kN; B:49,2 mm; Bolt (G):1/2; d:39,6875 mm; A:36 mm; Bearing number:UCF208-25E; A1:15 mm; Basic dynamic load rating (C):29,1 kN; L:130 mm; J:102 mm; Bore Diameter (mm):39,6875; A2:21 mm; S:19 mm; A0:51,2 mm; N:14 mm; |
| 161.16.0450.890.11.1503 Standard 5 Slewing Ring Bearings | Size (mm):76.2x149.225x53.975; rb max.:3,2 mm; T:53,975 mm; (Oil) Lubrication Speed:3500 r/min; B:54,229 mm; a:39,3 mm; Basic static load rating (C0):404 kN; Calculation factor (Y0):0,91; ra max.:3,6 mm; (Grease) Lubrication Speed:2700 r/min; D:149,225 mm; Width (mm):53,975; Db:141 mm; d:76,2 mm; Outer Diameter (mm):149,225; Bore Diameter (mm):76,2; Da:129 mm; C:44,45 mm; da min.:96 mm; Weight:4,25 Kg; |
| No. | Brand | r | D | W | e | T | C | M | t |
| 3R16-197E2 | Rotek | - | - | - | - | - | - | - | - |
| 3R8-110N1 | Rotek | - | 260 mm | - | - | - | 95 mm | - | - |
| 60.25.0955.500.11.1503 | Standard 5 | - | - | 2 mm | 2 mm | - | - | - | - |
| 162.25.0764.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R13-128N1A | Rotek | - | 93.264 mm | - | - | 30.163 mm | 23.813 mm | - | - |
| 232.21.0975.013 Type 21/1050.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0544.575.01.1403 | Standard 5 | - | 35 mm | - | - | - | 8 mm | - | - |
| 231.20.0700.013 Type 21/850.1 | Standard 5 | - | 620,000 mm | - | - | - | 165,000 mm | - | - |
| 231.20.0400.503 Type 21/520.1 | Standard 5 | - | 68,3 mm | - | - | - | - | - | - |
| 162.20.0450.891.21.1503 | Standard 5 | - | 870 mm | - | - | - | 310 mm | - | - |
| 161.16.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0700.503 Type 21/850.1 | Standard 5 | 0,6 mm | 47 mm | - | - | - | 12 mm | - | - |
| 62.20.0630.001.21.1503 | Standard 5 | - | - | - | - | - | 22 mm | - | - |
| 231.20.0800.013 Type 21/950.1 | Standard 5 | 3 mm | - | - | - | - | - | - | - |
| A16-78E4 | Rotek | - | 72 mm | - | - | - | - | - | - |
| 231.21.0475.013 Type 21/520.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.20.0544.575.01.1403 | Standard 5 | - | - | 2,5 mm | - | - | 16 mm | - | - |
| 230.20.0400.503 Type 21/520. | Standard 5 | - | 68 mm | - | - | - | 25 mm | - | - |
| S22-140E1 | Rotek | - | 180 mm | - | - | - | - | - | - |
| 62.25.0955.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| A19-111E1 | Rotek | - | 47 mm | - | - | - | 9 mm | - | - |
| 62.20.0944.575.01.1403 | Standard 5 | - | 42 mm | - | - | - | 20 mm | - | - |
| 230.20.0900.503 Type 21/1050. | Standard 5 | - | 710 mm | - | - | - | 82 mm | - | - |
| A16-79P1A | Rotek | - | 200 mm | - | - | - | - | - | - |
| 231.20.0400.013 Type 21/520.1 | Standard 5 | - | 42,700 mm | - | - | 3,000 mm | - | - | - |
| 230.20.0800.503 Type 21/950. | Standard 5 | - | - | - | - | - | - | - | - |
| 12.20.1085.000.11.1504 | Standard 5 | - | 320 mm | - | - | - | - | - | - |
230.20.0500.503 Type 21/650. Standard 5 Slewing Ring Bearings Video
230.20.0500.503 Type 21/650.0 Rothe erde slewing ring ...
230.20.0500.503 Type 21/650.0 Rothe erde slewing ring ; Weight / Kilogram: 0.39 ; Preload: Medium ; Width: 1.26 Inch | 32 Milli ; Harmonized Tariff Code: 8482.10.
230.20.0500.013 Type 21/650.0 Slewing Ring Bearings
230.20.0500.013 Type 21/650.0 Slewing Ring Bearings ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 434 mm ; Outside Diameter Of Outer Ring, 648 ...
230.20.0500.503 Type 21/650.0 - BSPD Bearing Manufacturing
230.20.0500.503 Type 21/650.0 ; Distance at top Outer ring/inner ring(Ho), 10,5 ; Attachment ; Outside bole-hole circle diameter (La), 620 ; Number of holes on ...Diameter(C): 505Diameter(O): 542,5Diameter(A): 583Diameter(U): 545,5
Buy 230.20.0500.503 Type 21/650.0 slewing rings without gear ...
230.20.0500.503 Type 21/650.0 slewing rings without gear ; Number of Tapered Rows: Double Row ; Component: Assembly ; Bore: 3 Inch | 76.2 Millim ; Flange Outside ...
230.20.0500.503 Type 21/650.0 - Slewing Ring Bearings ...
LYMC bearings are the perfect alternative to the most common and well-known brands.
230.20.0500.503 Type 21/650.0 Four-point contact ball slewing ...
Buy 230.20.0500.503 Type 21/650.0 Four-point contact ball slewing rings from Turbine Bearing Supplier，Thyssenkrupp Rothe Rrde Slewing Bearing Distributor ...
230.20.0500.503 Type 21/650.0 Four-point contact ball slewing ...
Size. 42x80x46 mm. Bore Diameter. 42 mm. Outer Diameter. 80 mm. Width. 46 mm d. 42 mm. D. 80 mm. B. 46 mm. Powered by TCPDF (www.tcpdf.org). Page 1/1.