| AMI UCNTPL206-19W Mounted Units & Inserts | Brand:CX; (Grease) Lubrication Speed:6811 r/min; Bearing number:Q207; Weight:0,37 Kg; Outer Diameter (mm):72; d:35 mm; C:17 mm; Size (mm):35x72x17; Basic static load rating (C0):38,2 kN; Bore Diameter (mm):35; |
| Timken hm212049 Bearing | Flange Width (Bf):0.600; Bearing number:SMF105; Max Speed (Grease) (X1000 RPM):50; Bore Diameter (mm):5; Min. Housing Shoulder Dia., Outer (Lo):7.8; Radius (min) (rs):0.150; Dynamic Load Rating (Cr):366; Static Load Rating (Cor):135; Bore Dia (d):5.0000; Standard Clearance:K25; |
| AMI MUCTBL206-20B Pillow Block Bearings | Design (sliding contact surface combination):Steel/steel; r2 min.:1 mm; B:33.325 mm; Specific factor dinamic load - K:100 N/mm2; dk:31.953 mm; M:2.5 mm; rb max.:1 mm; da min.:24.9 mm; Material constant KM:330; |
| AMI KHLCTE206-8MM Mounted Units & Inserts | D:205.000 mm; C - Cup Width:21.438 mm; Y - ISO Factor4:1.31; G2 - Heat Generation Factor (Rib-Roller End):103; Series:L730600; Design Units:METRIC; Db - Cup Backface Backing Diameter:189.99 mm; Cg - Geometry Factor:0.176; K - Factor2:1.27; r - Cup Backface To Clear Radius1:3.30 mm; |
| AMI MUCFBL207-23RFW Flange Block Bearings | Basic dynamic load rating (C):53 kN; r min.:1.5 mm; D:100 mm; d:45 mm; ra max.:1.5 mm; Brand:NACHI; Bearing number:6309-2NSE; Outer Diameter (mm):100; Weight:0.833 Kg; Basic static load rating (C0):32 kN; |
| AMI UC217-55 Insert Bearings Spherical OD | Calculation factor - e:0.3; K:4.5 mm; B1:68 mm; Da max.:169 mm; r1,2 min.:2 mm; Bearing number:23122 CCK/W33 + AHX; Fatigue load limit Pu:61 kN; ra - max.:2 mm; Bore Diameter (mm):180; d1:105 mm; |
| AMI UKP218+H2318 Pillow Block Bearings | Shaft Size (ds) - 65 -0.100 / -0.130:65 0.100 / 0.130; Material:Wrapped bronze with; Bearing Outside Diameter, Nominal(Do):70.000; Bore Diameter (mm):65; Housing Bore Dia. (Dh) - 70 +0.030 / -0:70 +0.030 / 0; Bearing number:ASTB90 F6535; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Brand:AST; Flange Dia. (Dfl pm 0.5):80.000; Bearing Length, Nominal (B):35.000; |
| AMI UENFL206-20MZ20CB Mounted Units & Inserts | D:12,7 mm; B:3,967 mm; C:3,967 mm; Bore Diameter (mm):7,938; Width (mm):3,967; Outer Diameter (mm):12,7; Size (mm):7.938x12.7x3.967; Bearing number:R1810; Brand:ISO; d:7,938 mm; |
| AMI UCPEU315-48 Pillow Block Bearings | fillet radius:1 mm; da max:39 mm; Noun:Bearing; bore type:Round; Category:Single Row Ball Bear; C:16,000 mm; Long Description:30MM Bore; 62MM Outs; Fatigue limit load, Cu:0.51 kN; D:62,000 mm; Nlim (grease):7,300 rpm; |
| AMI UEFT211 Flange Block Bearings | Brand:SNR; Bore Diameter (mm):85,000; Bearing number:22317EF801; H:60,000 mm; Width (mm):60,000; D:180,000 mm; Size (mm):85x180x60; d:85,000 mm; Outer Diameter (mm):180,000; |